Best Camera Lens Protector for Galaxy S22 Ultra in 2022

Featuring an impressive 6.8-inch Dynamic AMOLED QHD+ display with 1-120Hz, the new Samsung Galaxy S22 Ultra is an impressive device. With 5G connectivity and a Snapdragon 8 Gen 1 chipset, it’s widely considered as the best Android smartphone currently available.

Needless to say, the built-in cameras are just as amazing. In fact, the S22 Ultra is equipped with a 108MP (f/2.2) rear-facing main camera. In addition, the front-facing camera is capable of 40MP (f/2.2).

While the front-facing camera is well-protected with almost any screen protector or rugged case, the rear-facing camera lenses are largely exposed. Since these are embossed from the back, they stick-out, ever so slightly.

Because of this, the exposed lenses are particularly fragile. However, there’s a smart upgrade you can make that’s inexpensive but very effective. Opting for a camera lens protector, you can mitigate any danger and risk of accidently breaking the fragile rear-facing lenses. In fact, placing a camera lens protector is easy, inexpensive and seen as one of the best upgrades you can make to your S22 Ultra.

Choosing the Best S22 Ultra Camera Lens Protector

Selecting the correct camera lens protector for your S22 Ultra can be somewhat difficult. There are a wide range of options that are all somewhat similar.

Rather than spending an endless amount of time looking for the right one, we’ve tested and outlined the best options currently available. We’ll discuss the features, pros and cons of each one and ultimately give you a few great options to choose from. Let’s get right into it!

Best Overall: ESR Tempered Glass S22 Ultra Camera Lens Protector

The ESR Tempered Glass Camera Lens Protector is an excellent all-around great choice. Available in either black or white color schemes, it’s sold as a complete set of five separate lens protectors. Each one is applied individually to the rear-facing camera. Compatible with virtually every case, they have a very precise fit that fits snug and accurately around each round lens.

The material is an ultra-thin tempered glass that’s highly scratch and impact resistant. Not only does it protect against scuffs and shatter, the lens protectors are highly oleophobic, meaning that they’re very resistant to dust and water. In fact, the crystal-clear appearance makes no difference to the camera’s photo quality.

Best of all, ESR includes a useful installation kit with easy to follow instructions. This includes an alcohol-based wet wipe, microfiber cloth, sticky paper and alignment guide to perfectly install one. In addition, they’ve even included a removal tool in case you need to take off a cracked lens protector in the future. This makes for a simple, painless installation process that requires no previous experience.

What We Liked

• Very durable design, highly resistant to cracking.
• Only adds 0.5mm of thickness to your S22 ultra.
• Available in either black or silver.
• Includes a lens protector removal tool.
• Complete installation kit included.

What We Didn’t Like

• Slightly more expensive than others.
• Each lens protector needs to be individually applied.
• Does not protect the camera flash.
• No warranty or guarantee to speak of.

Best Runner-Up: Hoerrye S22 Ultra Camera Lens Protector

The Hoerrye S22 Ultra Camera Lens Protector is another great option. Available in either black, burgundy, green or silver, there’s more than enough color schemes to choose from. Like the ESR, this is sold as a complete set of 5 individual lens protectors. In fact, they’re incredibly similar. Due to their slim and minimalist design, they’re also compatible with virtually every case.

These feature a tempered glass material that’s multi-layered in conjunction with other miniscule parts. First, there’s a protective plate firm. It’s followed by a sponge seal ring and micropore tape. Next, you have the 9H tempered glass film, followed by an aviation-grade aluminum ring. We love how Hoerrye included these fine details to specify what the construction of each lens protector is actually comprised of. Honestly, they feel a bit stronger and burlier when compared to other options.

The Hoerrye lens protectors are also oleophobic. Naturally, they resist dust, grime and moisture so the clarity of your photos is never affected. Even with them applied, there’s no difference in image quality when snapping photos.

Just like the ESR set, the Hoerrye set of lens protectors includes everything you need, but no written instructions. However, it differs slightly since it does not include a lens removal tool. That said, each one can be manually pried-off if needed; but a handy little removal tool would have been a nice addition. Regardless, the instructions are clear to follow and simple in their execution.

What We Liked

• Very strong; offering some of the toughest protection.
• Only adds 0.6mm of thickness to your S22 ultra.
• Available in a wide range of color schemes.
• Aluminum outer lens ring is very strong.
• Comes with a 6-month warranty.
• Complete installation kit included.

What We Didn’t Like

• No removal tool included.
• No written instruction manual included.
• Does not protect the camera flash.

Best Alternative: Milomdoi Tempered Glass S22 Ultra Camera Lens Protector

Rather than individually protecting each lens, the Milomdoi Camera Lens Protector covers all lenses with one application. Comprised of tempered glass, this one-piece lens protector fits cleanly around the entire cluster of lenses on the rear of the S22 Ultra. Sold in a 4-pack, and priced nearly half as much as the ESR and Hoerrye, it offers quite a bit of value.

Unlike other designs, the Milomdoi protects the rear camera flash as well. When applied, each lens and the flash all become encased in the same one-piece protector. As a result, each fragile lens is inset, rather than being embossed outward. While this may make the lens protector a bit more susceptible to accidently drops and scratches, it effectively protects each one with a generous amount of defense.

Installation is quick and easy. With the included wet/dry wipes and sticky paper, following the instructions is very simple. And since the design is one-piece, they stick much better than any individually-applied lens protectors. Simply put, since there’s more surface area for it to adhere to your phone, the lens protector sticks incredibly well.

The Milomdoi lens protectors are oleophobic, dust, moisture, and fingerprint resistant. They’re widely case-friendly, too. However, it does not work well with any SUPCASE-branded cases. Virtually every other case is supported, however. In addition, the tempered glass is a bit thinner than average. This assures that there’s no interference with the photos you take. That said, these may not be quite as rugged as the ESR or Hoerrye. Luckily, you get 4 one-piece lens protectors in the pack, rather than just one. Ultimately, it only raises the lens bulkiness by 0.2mm, which is even slimmer than the ESR or Hoerrye.

What We Liked

• One-piece design protects all lenses simultaneously.
• Adds protection to the camera flash.
• Very inexpensive.
• Comes included with 4 one-piece lens protectors.
• Very strong adhesion.
• Complete installation kit included.

What We Didn’t Like

• No removal tool included.
• No warranty or guarantee to speak of.

Best 2nd Alternative: Oakxco S22 Ultra Camera Lens Protector

Very similar to the Milomdoi option we just discussed, the Oakxco S22 Ultra Camera Lens Protector is another great choice. It’s another one-piece design, but it’s sold in a 3-pack in either black or clear. However, it’s comprised specifically from high-grade Japanese Asahi glass, which is said to be some of the best quality tempered glass material currently available. In fact, when each lens protector is made, the glass undergoes a unique ion exchange tempering process. This adds clearness, rigidity and hardness that can’t be had otherwise.

Like the others, a complete installation kit is included, making setup a piece of cake. However, unlike the Milomdoi, the Oakxco has a 2.5D rounded-edge design. This keeps the lens protector from providing a sharp edge which will ultimately lessen the chance of chipping and accidental removal over-time. In fact, if you run your finger over the edge of the lens protector, you’ll immediately notice a smooth transition from the phone exterior to the protected camera lens area.

Additionally, the Oakxco lens protectors have a special anti-glare coating that assures you get a clear photos each time you use your camera. There’s no added milkiness or tint; letting your rear facing camera be unaffected by the added layer of protection. In fact, the added thickness only measures 0.15mm, which is the slimmest of all camera lens protectors for the S22 Ultra.

The Oakxco lens protectors are even certified for drop-protection for falls up to 6 ft. Best of all, they’ve included a lifetime warranty. This way, if you ever feel like the lens protector failed or falls off prematurely, you can contact the company for a full refund or replacement.

What We Liked

• One-piece design that’s easy to apply.
• Available in either clear or black.
• 2.5D rounded edge prevents chipping and/or accidently removal.
• Only adds 0.15mm of thickness to your phone.
• Covered by an impressive lifetime warranty.
• Complete installation kit included.

What We Didn’t Like

• Relatively thin material.
• No removal tool included.

Which S22 Ultra Camera Lens Protector is Best?

As you can see, there are a few excellent options available that all effectively protect the fragile rear-camera lenses on the S22 Ultra. While they may range in price and style, there’s a wide range of products that readily available to purchase. But which one is best? Ultimately, this is up for you to decide for yourself, based on the needs you may have.

The ESR Tempered Glass Camera Lens Protector offers some of the best protection available. Although it’s the most expensive of today’s offerings, it’s also one of the most well-made, overall. Each lens protector is applied individually and gives each of the five rear lenses a nice look. That said, you’re assured an attractive addition that frames each lens in a solid color.

The Hoerrye S22 Ultra Camera Lens Protector is quite similar to the ESR. However, it’s 0.01mm thicker, which isn’t even noticeable. That said, it’s arguably stronger than the ESR, but not by any large amount. We love how it’s available in a wider range of colors, so you can match or contrast your S22 Ultra in a well-executed manner.

Next, we examined the Milomdoi Camera Lens Protector. Rather than being individually applied to each exterior lens, it’s a single piece that encloses all of the lenses and even the flash. That said, we found it to adhere even better than any of the individually applied lens protectors. Additionally, it only adds 0.2mm of thickness. But best of all, it’s very affordable and sold in a 4-pack.

Last but surely not least, we took a closer look at the Oakxco S22 Ultra Camera Lens Protector. Quite similar to the Milomdoi, it encapsulates all of the rear camera lenses with one application. Made from a special high-grade Japanese Asahi glass, it’s said to offer some of the strongest protection. However, it’s even thinner than all of the other options. Needless to say, it leads us to question it’s durability over the course of time. However, it’s the only camera lens protector that’s protected by a lifetime warranty.